Shot Support

Adaptive Slope Technology provides you with compensated distance based on whether a target is uphill or downhill from your location. For example, a 156.8 yard uphill shot of 7 degrees really plays ...

Before turning the rangefinder on, hold the POWER button for 5 seconds to change units between Yards and Meters. The rangefinder will vibrate and cycle between Yards and Meters. Release the button ...

The rangefinder requires a CR2-3v battery and supports approximately 5,800 measuring times. When the battery icon appears on the screen it means the battery is low and should be replaced. Turn on t...

Pin Lock Turn on the rangefinder by pressing the POWER button once. Then press and hold the POWER button while aiming at the target. The laser will vibrate when it has locked onto the target and di...

Slide the slope indicator switch on the side of the rangeflnder forwards or backwards toturn slope on and off. This product is legal for tournament play when slope mode is disabled. Slope is activa...

Rotate the lens ring clockwise or anti clockwise to adjust to the correct focus for your eyes.

Turn on the rangefinder by pressing the POWER button once. If the laser doesn't power on make sure you have removed the plastic from the battery.

Shot Scope devices can be used in almost all amateur competitions. If you are playing in a competition that doesn’t allow the use of distance measuring devices then you can use the watch in Track m...

If used in misty or foggy conditions the laser may struggle to lock on to a pin or feature and display a yardage. The mist or fog makes it difficult for the optics to focus on a point due to interf...

You need to remove the plastic coating around the battery inside the device. Once the plastic has been removed and the battery has been re-inserted the device will power on and function.